Baud Rate: 115200
Data Bits: 8
Stop Bits: 1
Flow Control: None
Two GPIO that can be configured separately to be an input or output with 2.8V logic level and 15V tolerance and one dedicated output to activate/deactivate a relay with 500mA, 15V tolerance open drain MOSFET.
The device can send and receive data via UDP or SMS.
Yes, the device can send report data to two IP addresses.
The battery life depends on many factors including signal strength, how frequently the device is reporting, temperature, etc. However under normal conditions it lasts for more than one hour to two hours.
The report maximum data size reporting in binary is 45 bytes, this does not include IP and UDP header.
Yes, by removing unnecessary data items from the reports you can reduce it's size.
It can store up to 3000 reports on it's buffer.
16 rectangular geo-fences and 15 polygonal geo-fences.